Seals and Shelters

Summary of Features:

• Heavy-duty frame is double kiln-dried pressure treated lumber. Front frame is reinforced with 1/4" thick steel plate.

• Frames covered with white 18oz. coated vinyl to transmit natural light into the loading area

• Raked header permits weather drainage (flat header is used when shelter is protected by a hood or canopy)

• Foam weather strip provides a seal on the top front edge of the shelter frame, under aluminum trim angle

• Face curtains are sewn with multi-stranded, bonded V207 Dacron Polyester thread with a lock stitch. Seams will not "run" with wear.

• Scotchply fiberglass stays add stiffness to shelter face curtains. Four (4) stays in 900 series head curtains; five (5) stays in 1000 series head curtain.

• Wind straps on head curtain keep the head curtain from being blown out of position when shelter is not in use

• Four overlapping wear pleats per side absorb the impact from sharp trailer corners. (900 Series has 3 per side)

• Full length closed cell neoprene forms a wiper seal on the trailer's sides

• Wear panels with guide stripes provide drivers with a visual reference to the dock

• Full width double-layer strip forms a wiper seal across the top of trailers

• Tapered draft pads (8" to 1") located behind the side curtains help prevent air flow from lower corners of the shelter. Permanent "NO STEP" labels are included for safety.

• Heavy-duty steel I-Beam Protectors protect each side frame

Summary of Features:

• Provides maximum cushioning protection against vehicle damage to docks, and cargo.

• Constructed to last and provide years of protection.

• Eliminates costly repairs from severe shock to dock.

• Low maintenance.

• Several model selections available.